GT-B

Dry Blasting

GT-C

Water Jet Cutting

Chemical Composition

Guarantee Content  (%)

Typical Analysis    (%)

Al2O3

18 – 25

20.28

20.59

19.41

Fe2O3

3 – 6

5.10

3.3

5.51

SiO2

30 – 40

35.40

37.2

39.8

TiO2

0.5 – 3

2.83

0.52

1.86

CaO

1.5 – 4

3.92

2.9

3.33

MgO

1 – 5

4.5

5.09

2.56

FeO

20 – 30

26.27

29.49

25.34

MnO

0.5 - 2

1.5

0.64

0.72

CI

<25 ppm

nil

nil

nil

Physical Properties

Fusing Point

1200 ºC

Specific Gravity

4.2 g/cm3

Hardness

7 - 8 Mohs

GT-A

GT-B

GT-C

GRIT NO.

SIZE (um)

GRIT NO.

SIZE (um)

GRIT NO.

SIZE (um)

F20

800-1000

30/60

200-600

240 mesh

45-100

F24

630-800

20/60

200-1200

200 mesh

75-150

F30

500-630

12/40

500-1200

180 mesh

90-150

F36

400-500

20/40

500-1000

120 mesh

180-250

F40

12/20

1000-1200

80 mesh

180-350

F46

315-400

F60

250-315

F70

200-250

F80

160-200

F100

125-160

F120

100-120

F150

80-100

F180

63-80

F220

40-63

1.1  Description of preparation

Garnet sand

1.2  Use of the preparation

Abrasive

1.3  Detail of manufacturer / supplier

     Firm

Da Abrasives I&E Co., Ltd.

     Address

Rm.537, West Keyan Road 2.

     Postal code

300192

     Phone

0086-22-87899539

     Fax

0086-22-87899537

2. Composition / Information on ingredients

Chemical characterization of the preparation

Description

Mixture of the substances listed below with

Admixtures which are, pursuant to the

Ordinance on Dangerous Substances

(GefStoffV), not subject to labeling

Requirements.

Contents (average values)

Garnet sand

EC No.

CAS No.

  Description

      %

  Code letter

 R-sentences

231-716-3

7699-41-4

Silicon Oxide

(SiO2)

      35.00

      -

      -

215-168-1

1309-37-2

Iron Oxide

(FeO)

      30

       -

       -

215-168-2

1309-37-1

Iron (III) Oxide

(Fe2O3)

      3.00

      -

      -

215-691-6

1344-28-1

Aluminium oxide

(Al2O3)

      23.00

      -

      -

215-171-9

1309-48-4

Magnesium oxide

(MgO)

      6.00

      -

      -

215-138-9

1305-78-8

Calcium oxide

(CaO)

      1.00

      -

      -

215-266-5

1317-35-7

Manganese oxide

(MnO)

      1.00

      -

      -

Total Chlorides

(CI)

      10 ppm

      -

      -

Lead

(Zn)

      0.0015

       -

      -

Copper

(Cu)

      0.003

       -

      -

Sulphur

(S)

      0.006

       -

      -

2/5

3. Possible dangers

  Classification

Not subject to labeling requirements under the

Dangerous Preparations Directive 1999/45/EC

However, please note the information contained

In this safety data sheet.

Garnet sand is not injurious to the health. No.

Danger of silicosis arises when using the product.

Garnet sand is not carcinogenic and is

Toxicologically harmless

Additional danger warnings for humans

And environment

 -

General information

 -

After inhalation

Take injured person into the fresh air and have

Him/her lie calmly.

After contact with skin

Wash off with soap and water.

After contact with eyes

In case of contact with eyes, rinse open eyes

Under flowing water for 10 minutes.

After swallowing

Rinse out mouth and drink lots of water, Do not

Try and cause vomiting. If person feels unwell,

Consult doctor.

Protection of person providing First Aid

Ensure the person provided First Aid is protected

Notes for the doctor

 -

Suitable extinguishing substances

Product itself does not burn. Adapt extinguishing

Measures to environment.

Extinguishing substances which are not

Suitable due to safety reasons.

None known

Special dangers from the substance or the

Preparation itself, its combustion products

Or gases which arise

None known.

Special protective equipment in fighting fire

 -

Additional information

 -

Person-related precautionary measures

Avoid dust formation

See protective measures under points 7 and 8

Environmental protection measures

 -

Procedures to clean up / take up product

Take up mechanically and dispose of properly.

Additional information

 -

7.1 Handling

   Information on dealing with product safely

Avoid dust formation.

   Information on fire and explosion

   Protection.

No special fire protection measures necessary.

7.2 Storage

Store in the dry, Material tends to agglomerate in

Damp conditions.

   Requirements of containers

 -

   Unsuitable material for

   Containers/equipment

 -

   Information on mixed storage

LGK 13 (non-flammable solid materials)

8.1 Exposure limit values/Occupational limit values

   General dust limit value

   Inhale amount (E)

10 mg/m3

   Alveolar amount (A)

3 mg/m3

8.2 Equipment for personal protection

Respiratory protection

Normally, no personal respiratory protection is

Necessary in the case of insufficient ventilation or exceeding occupational limit values, a breathing mask is to be worn (FFP filtering half-mask face piece, depending on the given

Concentration)

   Hand protection

Glove material: leather

   Eye protection

Tight-fitting protective goggles. (closed safety

Goggles)

   Body protection

 -

Protective and hygiene measures

Minimum standards regarding protective

Measures for dealing with working substances

Are listed in TRGS 500. do not eat, drink, smoke

Or take snuff during work.

Avoid contact with skin, eyes and clothes.

Remove soiled or soaked clothes immediately,

Wash hands before breaks and at the end of work.

Precautionary protection of skin through skin

Ointments.

9.1 Appearance

   State of aggregation

Solid

   Shape

Angular

color

Red-brown

   Smell

Odourless

   pH value

n.m.a. (not meaningfully applicable)

   Melting point

Approx. 1,315 C

   Solidification point

n.m.a. (not meaningfully applicable)

   Boiling point

n.m.a. (not meaningfully applicable)

   Flash point

Substance is inorganic.

   Autoignition

The product is not self-igniting.

   Danger of explosion

The product is not explosive.

   Relative density

Approx.2.0-2.1 g/cm3

   Water solubility

Insoluble

   Conditions to be avoided

 -

   Substances to be avoided

 -

   Dangerous decomposition points

No dangerous decomposition products known.

   Other details

 -

   Acute toxicity

 -

   Irritation of and caustic effect on the skin

Not irritating

   Irritation of and caustic effect on eyes

Not irritating

   Sensitization

No sensitization known.

   General comments

 -

   Ecotoxic effects

No damaging effect on water organisms is to be

Expected.

   Information on elimination

This product is, according to experience so far,

Inert and not degradable.

   Further information on ecology

With proper handling and use, no environmental

Problems are to be expected.

Disposal / waste (product)

Unused abrasive:

The allocation of the EWC codes / waste

Descriptions are to be carried out specific to branch and process in accordance with AAV.

List of proposals for EWC codes / waste

Description pursuant to AAV. 120117 abrasive

Waste with the exception of waste which comes

Under 120116.

Uncleaned packaging

Can, taking into account the necessary technical

Regulations, and after consultation with the

Disposal agency, be burned together with

Household waste.

   Transport / Automobile

Not dangerous goods within the meaning of

These transport regulations.

15.1 Labeling

   Labeling in accordance with EC Directive

The preparations are not subject to

Labeling requirements under EC Directives.

   Code letter(s) and description(s) of danger

 -

Danger-determining component(s) for labele

 -

Danger symbol and Description(s) of danger

 -

R-sentences

 -

    S-sentences

26 in case of contact with eyes, immediately

Rinse thoroughly with water and consult doctor

37/39 wear suitable protective gloves and

Protective goggles when working.

    comments

 -

15.2 National regulations

    Major Accidents Ordinance

 -

    Technical guidelines regarding air

 -

    Water endangerment category

Does not endanger water;

Classification pursuant to the Administrative

Guideline on water-endangering substances

(VwVwS), appendix 4

Other regulations, restrictions

And banning ordinances

 -

   Wording of the R-sentences under section 2

 -

R-sentences

 -

   Recommended restriction of use

 -

   Reason for change

The details in this safety data sheet correspond

To the best of our knowledge to our findings at

The time of printing. The information is intended

To provide indications on how to use the product

Named in this safety data sheet safely in respect of storage, processing, transport and disposal, the information is not transferable to other products.

Insofar as the product named in this safety data

Sheet is mingled, mixed or processed, or worked on, the information in this safety data sheet anything to the contrary, cannot be transferred to the new material made in this way.