MSDS silicon carbide.pdf
Black Silicon Carbide
Black silicon carbide, supplied by Da Abrasives, which is manufacturered at high
temperature in an electric resistance type arc furnace with quarts sand and petroleum
coke as its main raw materials..
Chemical Composition(%) --per GB/T2480-1996
Grit Size | SiC | FC | Fe2O3 |
F12-F90 | 98.5 | <0.20 | 0.60 |
F100-F150 | 98.50 | <0.30 | 0.80 |
F180-F220 | 97.00 | <0.30 | 1.20 |
F230-F400 | 96.00 | <0.40 | 1.20 |
F500-F800 | 95.00 | <0.40 | 1.20 |
F1000-F1200 | 93.00 | <0.50 | 1.20 |
BLACK SILICON CARBIDE DATA SHEET
| C-F | For making grinding wheels |
C-P | For making coated abrasives |
C-R | For refractory |
|
|
Chemical Composition |
| Guarantee Content (%) | Typical Content (%) |
SiC | 98.50% min. | 99.07% |
Fe2O3 | 0.20% max. | 0.17% |
SiO2 | 0.20% max. | 0.16% |
Free C | 0.10% max. | 0.04% |
CaO | 0.05% max. | 0.04% |
MgO | 0.05% max. | 0.03% |
|
|
|
Physical Properties |
|
Color | Black |
Specific Gravity | 3.55 g/cm3 |
Hardness | 9 Mohs |
Grit No. | Bulk Density g/cm3 |
C-P | C-V |
|
F10 | 1.80-2.00 | 1.84-2.07 |
|
F12 | 1.79-1.98 | 1.83-2.06 |
|
F14 | 1.78-1.97 | 1.81-20.4 |
|
F16 | 1.76-1.95 | 1.80-2.03 |
|
F20 | 1.75-1.93 | 1.78-1.96 |
|
F24 | 1.73-1.90 | 1.76-1.94 |
|
F30 | 1.72-1.88 | 1.74-1.93 |
|
F36 | 1.70-1.86 | 1.72-1.92 |
|
F40 | 1.68-1.85 | 1.70-1.90 |
|
F46 | 1.66-1.84 | 1.68-1.88 |
|
F54 | 1.65-1.85 | 1.66-1.86 |
|
F60 | 1.63-1.83 | 1.64-1.85 |
|
F70 | 1.61-1.81 | 1.62-1.83 |
|
F80 | 1.59-1.80 | 1.60-1.81 |
|
F90 | 1.58-1.75 | 1.58-1.75 |
|
F100 | 1.57-1.73 | 1.57-1.73 |
|
F120 | 1.55-1.71 | 1.55-1.71 |
|
F150 | 1.54-1.68 | 1.54-1.68 |
|
F180 | 1.52-1.66 | 1.52-1.66 |
|
F220 | 1.50-1.65 | 1.50-1.65 |
|
Safety Data Sheet Pursuant to 91/155/eec
Products: Silicon Carbide Revised date: 18, June 2019
Supplier: Dragon-abrasives Group Limited
1. Identification of material/preparation and firm |
1.1 Description of Products: | Silicon Carbide ( SiC ) |
1.2 Use of the products | Abrasive, Grinding Wheel, Sands Paper |
1.3 Supplier |
|
Firm | Dragon abrasives Group Limited |
Address: | Rm. 2519, Trading Times Apartment #265 Anshan W. Rd. Tianjin China |
Tel | 022-87899539 |
Fax | 022-87899537 |
2. Composition/Information on ingredients |
Description | Mixture of the substances listed below with Admixtures which are, pursuant to the ordinance on Dangerous Substances (GefStoffV), not subject to labelling Requirements. |
Chemical Contents | (average values) |
EC No. CAS No. | Description | % | Code letter | R-sentences |
206-991-8 409-21-2 | Silicon carbide (SiC) | 98.50 |
|
|
231-716-3 7699-41-4 | Silicon Oxide (SiO2) | 0.25 |
|
|
231-130-8 7440-21-3 | Silicon (Si) | 0.15 |
|
|
215-168-2 1309-37-1 | Iron (III) Oxide (Fe2O3) | 0.25 |
|
|
| Free Carbide ( C ) | 0.30 |
|
|
3. Possible Dangers |
Classification | Not subject to label requirements under the Dangerous Preparations Directive 1999/45/EC However, Please note the information contained in this safety data sheet. No danger of silicosis arises when using the product. |
Additional danger warnings for humans and environment |
|
Dragon-Abrasives Page 1/5
Safety Data Sheet Pursuant to 91/155/eec
Products: Silicon Carbide Revised date: 18, June 2019
Supplier: Dragon-abrasives Group Limited
4. Fire Aid measures |
General information | - |
After inhalation | Take injured person into the fresh air and have him/her lie calmly |
After contact with skin | Wash off with soap and water |
After contact with eyes | In case of contact with eyes, rinse open eyes Under flowing water for 10 minutes. |
After swallowing | Rinse out mouth and drink lots of water Do not try and cause vomiting. If person feels unwell, consult doctor. |
Notes for the doctor | - |
5. Fire-fighting measures |
Suitable extinguishing substances | Products itself does not burn. Adapt Extinguishing measures to environment. |
Extinguishing substances which are not suitable due to safety reasons. | None Known. |
Special dangers from the substance or the preparation itself, its combustion products or gases which arise. | None known |
Special protective equipment in fighting fire |
|
Additional information |
|
6. Accidental release measures |
Person-related precautionary measures | Avoid dust formation. See protective Measures under points 7 and 8. |
Environmental protection measures | - |
Procedures to clean up | Take up mechanically and dispose of properly. |
Additional information | - |
7. handling and storage |
7.1 Handing |
|
Information on dealing with product safely | Avoid dust formation |
Information on fire and explosion protection | No special fire protection measures Necessary. |
Dragon-Abrasives Page 2/6 |
Safety Data Sheet Pursuant to 91/155/eec Products: Silicon Carbide Revised date: 18,June 2019 Supplier: Dragon-abrasives Group Limited |
7.2 Storage | Store in the dry, Material tends to agglomerate in damp conditions. |
Requirements of containers | - |
Unsuitable material for containers | - |
Information on mixed storge | LGK13(non-flammable solid materials) |
8. Exposure limits and equipment for personal protection |
8.1 Exposure limit values/Occupational limit values |
General dust limit value |
|
Inhalable amount (E) | 10 mg/m3 |
Alveolar amount (A) | 3 mg/m3 |
8.2 Equipment for personal protection |
|
Respiratory protection | Normally, no personal respiratory protection is necessary in the case of insufficient ventilation or exceeding occupational limit values, a breathing Mask is to be worn(FFP filtering half-mask face, depending on the given concentration) |
Hand Protection | Glove material: leather |
Eye Protection | Tight-fitting protective goggles |
Body protection | - |
Protective and hygiene measures | Minimum standards regarding protective Measures for dealing with working substances are listed in TRGS 500. Do not eat, drink, smoke or take snuff during Work, Avoid contact with skin, eyes and clothes, Remove soiled or soaked clothes immediately wash hands before breaks and at the end of work, Precautionary protection of skin through skin ointments. |
9. Physical and chemical properties |
9.1 Appearance |
|
State of aggregation | Solid |
Shape | Flaky |
Color | Black/Green |
Smell | Odourless |
Dragon-Abrasives Page 3/6 |
Safety Data Sheet Pursuant to 91/155/eec Products: Silicon Carbide Revised date: 18, June 2019 Supplier: Dragon-abrasives Group Limited |
9.2 Safety-relevant data |
|
pH value | n.m.a. (not meaningfully applicable) |
Melting point | Approx. 2200 ℃ |
Solidification point | n.m.a. (not meaningfully applicable) |
Boiling point | n.m.a. (not meaningfully applicable) |
Flash point | Substance is inorganic. |
Autoignition | The product is not self-igniting. |
Danger of explosion | The product is not explosive |
Relative density | Approx. 3.20 g/cm3 |
Water solubility | Insoluble |
10. Stability and reactivity |
Conditions to be avoided | - |
Substances to be avoided | - |
Dangerous decomposition points | No dangerous decomposition products Known. |
Other details | - |
11. Toxicological information |
Acute toxicity | - |
Irritation and caustic effect on the skin | Not irritating |
Irritation and caustic effect on eyes | Not irritating. |
Sensitization | No sensitization known. |
General comments | - |
12. Ecological information |
Ecotoxic effects | No damaging effect on water organisms is to be expected. |
Information on elimination | This product is according to experience so far, inert and not degradable. |
Further information on ecology | With proper handling and use, no environmental problems are to be expected. |
Dragon-Abrasives Page 4/6
Safety Data Sheet Pursuant to 91/155/eec
Products: Silicon Carbide Revised date: 18, June 2019
Supplier: Dragon-abrasives Group Limited
13. Disposal considerations |
Disposal/ waste (product) | Unused granulate: The allocation of the EWC codes/waste descriptions is to be carried out specific to branch and process in accordance with AAV. List of proposale for EWC codes/waste description pursuant to AAV; 120117 Abrasive waste with the exception of waste which comes under 120116. |
|
Uncleaned packaging | Can, taking into account the nesessary technical regulations, and after consultation with the disposal agency, be burned together with household waste. |
14. Transport information |
Transport | Not dangerous goods within the meaning of these transport regulations. |
15. Regulations |
15.1 Labeling |
|
Labeling in accordance with EC Directive. | The preparations are not subject to labeling requirement under EC directives. |
Code letter and description of danger | - |
Danger-determining component for labeling | - |
Danger symbols and descriptions of danger | - |
R-sentences | - |
S-sentences | 26 in case of contact with eyes, immediaterly rinse thoroughly with water and consult doctor doctor. 37/39 wear suitable protective gloves and protective goggles when working. |
15.2 National regulations |
|
Major Accidents Ordinance | - |
Technical guidelines regarding air | - |
Dragon-Abrasives Page 5/6
Safety Data Sheet Pursuant to 91/155/eec
Products: Silicon Carbide Revised date: 18, June 2019
Supplier: Dragon-abrasives Group Limited
Water endangerment category | Does not endanger water: Classification Pursuant to the Administrative Guideline onwater-Endangering substance (VwVwS ,appendix 4 |
Other regulations, restrictions and banning ordinances | - |
15.3 International regulations | All ingredients of this material are listed on the TSCA inventory. |
16 Other information |
Wording of the R-sentences under section2 | - |
R-sentences | - |
Recommended restriction of use | - |
Reason for change (details in the safety Data sheet) | - |
Further information | The details in this sheet correspond the best of our knowledge to our findings at the time of printing, the information is intended to provide indications on how to use the product named in this sheet safely in respect of storage, processing, transport and disposal, The information is not transferable to other products. |
Da-Abrasives Page 6/6